ETABS-2013-Video Tutorials/Training

(SKU ID: DV023)
Rs. 9,999
Qty: 

ETABS-2013-Video Training


Chapter-1

Introduction/Kick-Start

  • Introduction
  • Advanced capabilities of ETABS 2013
  • Brief history
  • ETABS 2013 Levels
  • Modeling Process
  • Modeling Features
  • Analysis Features
  • Design Feature
  • Detailing Feature
  • Modeling Terminology & details
  • Load case
  • Load Combinations
  • Design Settings and scope
  • Output and Display settings
  • Model Initialization
  • New model quick template
  • GUI after setting template

 

Chapter-2

Foundation Concept startup

  • The ETABS graphical user interface
  • File Operations & Different Extn
  • Time Saving Options
  • Templates and Defaults
  • Basic Process
  • Standard Tool bars for Doc Managing
  • Standard Tool bars for Doc Zoom
  • Standard Tool bars for Doc View
  • Standard Tool bars for Graphics & Load Display
  • Model Explorer
  • Draw Tools
  • Draw beam-Plan/Elev/3D
  • Draw Column-Plan/Elev/3D
  • Draw Brace-Plan/Elev/3D
  • Quick Draw beam-Plan/Elev/3D
  • Quick Draw Column-Plan/Elev/3D
  • Quick Draw Secondary Beam-Plan/3D
  • Quick Draw Braces-Plan/Elev/3D
  • Draw Floor/Wall-Plan/Elev/3D
  • Draw Rectangular Floor/Wall-Plan/Elev
  • Quick Draw Floor/Wall-Plan/Elev
  • Draw Wall-Plan
  • Quick Draw Wall-Plan
  • Draw Wall opening-Plan/Elev/3D
  • Draw Links--Plan/Elev/3D
  • Draw Wall stacks-Plan/Elev/3D
  • Wall Meshing techniques
  • How to apply conditioning to walls/slabs/floor for EQ Analysis
  • Understanding of Edge constraints for Shear wall/slabs
  • Example Case study mesh
  • Units
  • Display Units
  • Units Setting
  • Project-1
  • Project-2
  • Project-3
  • Exercise-1
  • Exercise-2
  • Exercise-3

 

Chapter-3

Modeling & Properties Options

  • Quick Template settings and Structural Objects
  • Properties of Steel deck
  • Properties of Staggered truss
  •  Properties of Flat Slab
  • Properties of Flat Slab with Perimeter Beams
  • Properties of  Waffle Slab
  • Properties of 2 Way or Ribbed Slab
  • Grid System
  • Uniform Grid Spec
  • Custom Grid Spec
  • Properties  Add
  • Properties  Delete
  • Properties  Modify
  • Frame section Reinforcement-Rebar
  • Story Dimension
  • Story data
  • Modify/Show Story Data
  • Project-1
  • Project-2
  • Project-3
  • Project-4
  • Exercise-1
  • Exercise-2

 

Chapter-4

Advanced Modeling Options

  • Replicate Options
  • Extrude Joints & Frames
  • Add model from Template-2D Frame
  • Add model from Template-2D Truss
  • Add model from Template-2D Wall
  • Add model from Template-3D-Steel Deck
  • Add model from Template-3D-Staggered Truss
  • Add model from Template-3D-Flat Slab
  • Add model from Template-3D-Flat Slab with Perimeter Beams
  • Add model from Template-3D-Waffle Slab
  • Add model from Template-3D-2 Way or Ribbed Slab
  • Move Joints/Frames/Shell
  • Define Material
  • Material Property Data
  • Frame Properties
  • Snap Options
  • Cladding non-structural member for wind load
  • Project-1
  • Project-2
  • Project-3
  • Project-4
  • Project-5
  • Project-6

 

Chapter-5

Advanced Boundary Conditions

  • Joint Loads-Force Parameters
  • Load Pattern & options
  • Joint Loads-Ground Displacement Parameters
  • Joint Loads-Temperature
  • Frame Loads-Point based load Parameters
  • Frame Loads-Distributed load Parameters
  • Frame Loads-Temperature
  • Frame Loads-Structure Wind Parameters
  • Shell Loads-Uniform Load Sets Parameters
  • Shell Loads-Uniform  Parameters
  • Joint Restraints
  • DOF-For Pin,Roller,Fixed & free etc
  • How to reconfigure Supports
  • IS 875-   Part 1-Dead Loads & ETABS
  • IS 875-   Part 2-Imposed Load & ETABS
  • IS 875-   Part 3-Wind Loads & ETABS
  • IS.15498.2004
  • Explanation about EQ Load and Basic Orientation on Project
  • International Other country Load cases i.e ASCE,AS,EURO,Italian,NBCC,Turkish,AS/NZS,UBC
  • Project-1
  • Project-2
  • Project-3
  • Project-4
  • Exercise-1
  • Exercise-2
  • Exercise-3

 

Chapter-6

Detailing–ETABS-2013

  • Detailing scope
  • Detailing Preference
  • Concrete Detailing Preference-Slab/Beam/Col/Wall
  • Steel Detailing Preference
  • Rebar Section Rules
  • Drawing Sheet Setup
  • Start Detailing
  • Show Detailing
  • Detailing Reports and configuration/Visualization
  • Prepare component and Elements detailing
  • Export Drawings
  • Project-1
  • Exercise-1
  • Exercise-2

 

Chapter-7

Concrete Frame Design-RCC Design

  • RCC Design Overview
  • Capability RCC Design
  • What To do check list before running RCC Analysis
  • RCC Design Preference
  • IS 456:2000 & Design Guide Lines
  • International RCC Design codes for other countries & Implementation
  • RCC Design Member
  • Start Design/Check
  • Display Design info
  • Display Design Results
  • Rebar % and other important Output discussion
  • Project-1
  • Exercise-1
  • Exercise-2
  • Exercise-3

 

Chapter-8

Shear Wall Design

  • Shear Wall Design Preference
  • IS 456:2000 & Design Guide Lines
  • Shear Wall Design –PIERS  & SPANDRELS
  • Shear Wall Optimization for Thickness & Target Drift
  • Supported Codes
  • Design Combination
  • Start Design/Check
  • Display Design info
  • Display Design Results
  • Shear Wall pier summary
  • Shear wall Design Details
  • Design Output Complete detail discussion
  • Longitudinal reinforcement and other important Output discussion
  • Project-1

 

Chapter-9

Modal Frequency Analysis

  • What is modal Analysis?
  • The Natural Frequency of a Building
  • Structural Matrix & System Response
  • Benefits of modal analysis
  • How Natural Frequency emanates?
  • Resonance
  • Case study-1
  • Case Study-2& Examples
  • Modal case Data config
  • Modal Result Table config
  • Modal Periods & Frequencies
  • Modal Participation Mass Ratio
  • Modal Participation Factors
  • Load Participation Ratio
  • Modal Direction Factors
  • Modal Report Export to Excel
  • Mode Shapes  Settings
  • Project-1

 

Chapter-10

Import/Export-Concept  

  • Importing Fundamentals and Unit systems
  • Importing from Old ETABS Versions
  • Importing from STAAD.Pro
  • Importing from Revit Structure
  • Importing DWG
  • Importing DXF
  • Importing Architectural Options setting
  • Layer control
  • ARCH Layer Auto create wall/column/beam/area options
  • Properties configuration while auto create
  • Exporting DWG/DXF
  • Project-1-dxf
  • Project-2-dwg
  • Project-3-STAAD

 

Chapter-11

Selection Quick Tricks

  • Pointer/Window Selection
  • Poly selection
  • Intersection poly
  • Interesting Line
  • Co-ordinate specification
  • Object type selection i.e. column/beam/wall etc.
  • Properties selection types
  • Material properties selection
  • Frame sections
  • Slab sections
  • Deck sections
  • Wall sections
  • Link/support properties
  • Point spring
  • Line spring
  • Area spring
  • Panel zones
  • Labels
  • Group
  • Stories
  • All
  • Deselect strata in detail
  • Invert selection
  • Clear selection